6200 Bearing
The 6200 bearing is a deep groove ball bearing with an inner diameter of 10 mm , an outer diameter of 30 mm, a width of 9 mm. It typically uses P0 or P5 or P4 grade precision tolerances and Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Single row deep groove ball bearing without shields 10mm inside x 30mm outside x 9mm width
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
Share this product to:
Let more people see your product
-
- 6015 2RS bearing
- Single row deep groove ball bearing 6015 with two rubber shields 75mm
-
- 6088 bearing
- Single row deep groove ball bearing 6088 without shields 440mm inside x
-
- 6019 ZZ bearing
- Single row deep groove ball bearing 6019 with two rubber shields 95mm
-
- 6028 ZZ bearing
- Single row deep groove ball bearing 6028 with two metal shields 140mm
-
- UCF202 bearing
- Pillow block bearing UCF202: Normal Duty 4 Bolt Hole Flange Bearing 15mm
-
- 60/800 bearing
- Single row deep groove ball bearing 60/800 without shields 800mm inside x
-
- UCF212 bearing
- Pillow block bearing UCF212: Normal Duty 4 Bolt Hole Flange Bearing 60mm
-
- 6418 bearing
- Single row deep groove ball bearing 6418 without shields 90mm inside x