61932M.C3 Bore 160 Mm, Single Row, Open Design Ball Bearings, Self-retaining, Solid Brass Cage
The 61932M.C3 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 61932M.C3 bearing is a Deep groove ball bearings, Single row , open design, self-retaining with an inner diameter of 160 mm , an outer diameter of 220 mm, a width of 28 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial, Its dynamic radial rated load is approximately 100000 N, its static radial rated load is approximately 108000 N. It uses C3 standard radial clearance, Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
61932M.C3 bearings ( 160 mm x 220 mm x 28 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 61932M.C3 |
| Interchangeable | FAG 61932M.C3 |
| Cage | M = Solid brass cage, ball-guided |
| Radial internal clearance | C3 |
| Seal | Open |
| Bearing Type | Deep groove ball bearings, Single row , open design, self-retaining |
| Bearing Weight [lb] | 7.077 |
| d φ Inside [inch] | 6.299 |
| D Φ Outside [inch] | 8.661 |
| B Width [inch] | 1.102 |
| rs min Chamfer | 2.0 mm |
| Cr Radial Dynamic [lbf] | 22480 |
| C0r Radial Static [lbf] | 24278 |
| D1 min [inch] | 6.654 |
| D3 max [inch] | 8.307 |
| rg max Fillet radius [inch] | 0.079 |
| f0 | 16.4 |
Share this product to:
Let more people see your product
