615659A Crossed Roller Bearing
The 615659A bearing is a Cross roller bearing with an inner diameter of 685.8 mm , an outer diameter of 914.4 mm, a width of 79.375 mm. It typically uses P4 grade precision tolerances and 2RS type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
615659A Crossed Roller Bearing 685.8X914.4X79.375mm
Technical:
| Type | d(mm) | D(mm) | B(mm) | r |
| XR897051 | 1549.4 | 1828.8 | 101.6 | 3.3 |
| XR903054 | 1879.6 | 2197.1 | 101.6 | 5.4 |
| 616093A | 203.2 | 279 | 31.75 | 1.5 |
| 616094A | 300 | 400 | 37 | 1.5 |
| 615661A | 330 | 457 | 63.5 | 3.3 |
| 615894A | 457.2 | 609.6 | 63.5 | 3.3 |
| 615662A | 580 | 760 | 80 | 3.3 |
| 615659A | 685.8 | 914.4 | 79.375 | 3.3 |
| 615895A | 901.7 | 1117.6 | 82.555 | 3.3 |
| 615897A | 1270 | 1524 | 95.25 | 1.8 |
1.Your inquiry to our product & price will be replied within 24 hours.
2.OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
3.Your business relationship with us will be confidential to any third party.
Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45º angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket,main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance ,keep the bearing
horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install,use a rubber hammer to
slightly hit every part of the bearing,so that the bearing can be attention to the hitting force is too
large.Afterwards,the matching status of bearing and basic face can be examined by checking the noise.For a
interference fit,use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing
temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly
and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the
bracket.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range,please contact LDB.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing
Share this product to:
Let more people see your product
-
- High precision XIU10/288 Cross roller bearing 216*340*38mm
- we have the stock in XIU10/288 Cross roller Bearing.If you have the
-
- High precision XIU15/400 Cross roller bearing 304*475*55mm
- we have the stock in XIU15/400 Cross roller Bearing.If you have the
-
- Super precision XIU15/414 Cross roller bearing 325*484*56mm
- we have the stock in XIU15/414 Cross roller Bearing.If you have the
-
- Cheaper price XIU10/420 Cross roller bearing 332*486*38mm
- we have the stock in XIU10/420 Cross roller Bearing.If you have the
-
- 22348CCK/W33+H2348 bearing
- We are a bearing manufacturer and we have a large stock of
-
- F-229456 Needle Roller Bearing
- We have the stock in F-229456 Needle Roller Bearing.If you
-
- 71912C/2RS/P4 Angular contact ball bearing 60*85*13mm
- We have the stock in 71912C Angular contact ball bearing.If
-
- 22352CC/W33 self-aligning roller bearing 260mm*540mm
- We have the stock in 22352CC/W33 self-aligning roller bearing.If you