545678 Bore 240 Mm, Tapered Roller Thrust Bearings Double Acting, With Spacer, Brass Cage
The 545678 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 545678 bearing is a Tapered Roller Thrust Bearings double acting, with spacer with an inner diameter of 240 mm , an outer diameter of 380 mm, a width of 105 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears axial, Its dynamic radial rated load is approximately 980000 N, its static radial rated load is approximately 5200000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
545678 bearings ( 240 mm x 380 mm x 105 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 545678 |
| Interchangeable | FAG 545678 |
| Cage | brass cage |
| Seal | Open |
| Bearing Type | Tapered Roller Thrust Bearings double acting, with spacer |
| Bearing Weight [lb] | 97.002 |
| dw Inside [inch] | 9.449 |
| dg [inch] | 10.827 |
| Dg Outside [inch] | 14.961 |
| Sw [inch] | 1.063 |
| H Height [inch] | 4.134 |
| rs min Chamfer | 2 mm |
| r1s min Chamfer | 2 mm |
| Cr Radial Dynamic [lbf] | 220304 |
| C0r Radial Static [lbf] | 1168960 |
| D4 max [inch] | 10.512 |
| rg max Fillet radius [inch] | 0.079 |
| rg1 max Fillet radius [inch] | 0.079 |
Share this product to:
Let more people see your product
