544752 Bore 177.8 Mm, Tapered Roller Bearings, Double Row With Extended Cone
The 544752 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 544752 bearing is a Tapered Roller Bearings, double row with extended cone with an inner diameter of 177.8 mm , an outer diameter of 269.875 mm, a width of 139.7 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 2550000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
544752 bearings ( 177.8 mm x 269.875 mm x 139.7 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 544752 |
| Interchangeable | FAG 544752 |
| Desgin Figure | 2 |
| Cage | Stamping steel cage |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Bearings, double row with extended cone |
| Bearing Weight [lb] | 79.366 |
| d φ Inside [inch] | 7.000 |
| D Φ Outside [inch] | 10.625 |
| B Width [inch] | 5.500 |
| Bi Width [inch] | 7.250 |
| d1 [inch] | 7.625 |
| rs min Chamfer Cup | 3.3 mm |
| r1s min Chamfer Cone | 0.8 mm |
| C0r Radial Static [lbf] | 573240 |
| Cr Radial Dynamic ISO 281 [lbf] | 265264 |
| Cr Radial Dynamic (value for housings with angular freedom) [lbf] | 307976 |
| Cr90 Equivalent load rating [lbf] | 79804 |
| Ca90 Equivalent load rating [lbf] | 20569 |
| Factor | |
| e | 0.26 |
| K Thrust factor | 2.21 |
Share this product to:
Let more people see your product
