539205 Bore 420 Mm, Split Cylindrical Roller Bearings For Crankshafts In Cold Pilger Rolling Mills, Machined Brass Cage
The 539205 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 539205 bearing is a Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills with an inner diameter of 420 mm , an outer diameter of 740 mm, a width of 319 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial, Its dynamic radial rated load is approximately 4050000 N, its static radial rated load is approximately 6800000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
539205 bearings ( 420 mm x 740 mm x 319 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 539205 |
| Interchangeable | FAG 539205 |
| Desgin Figure | 3 |
| Cage | Machined Brass Cage |
| Seal | Open |
| Bearing Type | Split Cylindrical Roller Bearings for crankshafts in cold pilger rolling mills |
| Bearing Weight [lb] | 1477.082 |
| d φ Inside [inch] | 16.535 |
| D Φ Outside [inch] | 29.134 |
| B Width [inch] | 12.559 |
| Bi Width [inch] | 12.598 |
| DD [inch] | 32.283 |
| b [inch] | 7.480 |
| rs min Chamfer | 12x45° mm |
| Cr Radial Dynamic [lbf] | 910440 |
| C0r Radial Static [lbf] | 1528640 |
Share this product to:
Let more people see your product
