533805 Bore 384.175 Mm, Tapered Roller Bearings, Double Row For Loose Fit On The Roll Neck, Machined Steel Cages
The 533805 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 533805 bearing is a Tapered Roller Bearings, double row for loose fit on the roll neck with an inner diameter of 384.175 mm , an outer diameter of 546.1 mm, a width of 193.675 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 7800000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
533805 bearings ( 384.175 mm x 546.1 mm x 193.675 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 533805 |
| Interchangeable | FAG 533805 |
| Desgin Figure | 3 |
| Cage | machined steel cages - pin type |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Bearings, double row for loose fit on the roll neck |
| Design type | TDI |
| Equivalent Timken (TDI-Type) | HM266449D.410 |
| Bearing Weight [lb] | 330.690 |
| d φ Inside [inch] | 15.125 |
| D Φ Outside [inch] | 21.500 |
| B Width [inch] | 7.625 |
| Bi Width [inch] | 7.625 |
| rs min Chamfer Cup | 6.4 mm |
| r1s min Chamfer Cone | 3.3 mm |
| C0r Radial Static [lbf] | 1753440 |
| Cr Radial Dynamic ISO 281 [lbf] | 685640 |
| Cr Radial Dynamic (value for housings with angular freedom) [lbf] | 798040 |
| Cr90 Equivalent load rating [lbf] | 202320 |
| Ca90 Equivalent load rating [lbf] | 65192 |
| Factor | |
| e | 0.33 |
| K Thrust factor | 1.75 |
Share this product to:
Let more people see your product
