53322MP Double-direction Thrust Ball Bearings With Good Quality
The 53322MP bearing is a Thrust ball bearings with an inner diameter of 110 mm , an outer diameter of 190 mm, a width of 67.2 mm. It typically uses p4 grade precision tolerances and zz/rs/open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Descriptions of the thrust ball bearing
Thrust bearings are designed to handle axial loads while operating at high speed. Bearings are composed of bearing rings with raceway grooves for the balls. Double direction thrust ball bearings can support axial load in both directions. Neither style can be subjected to radial loads. Available in bore dimension range from 10mm to 560mm.
Thrust ball bearings consist of shaft washer, a housing washer and a ball and cage thrust assembly. They are separable which means that mounting is simple. They can accommodate axial loads in one direction only and must not be subjected to any radial load.
Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage assembly. These bearings can only handle thrust loads in one direction.
More details about the products
|
Type of thrust ball bearing |
1. Single way thrust ball bearing 2. Double way thrust ball bearing 3. Flat thrust ball bearing
|
|
Application |
Crane hook, vertical pumps, vertical centrifugal, lifting jack, low speed reducer, |
|
Component |
Seat, shaft ring and ball cage |
|
Single way thrust ball bearing |
Seat, shaft ring and ball cage, separate |
|
Cage: pressed steel, Injection of glass fiber reinforced nylon 6. 1.One-piece machine cutting brass cage 2.One-piece machine cutting copper steel cage 3.Modular machine cutting brass cage
|
|
|
Flat thrust ball bearing |
Low speed, long life |
|
Application:1.the elevator parts/plastic machinery 2.office equipment/medical apparatus and instruments 3.Stepper motor/deceleration speed change device 4.Pressure rotor/fitness and sports equipment |
|
Share this product to:
Let more people see your product
-
- 53200 bearing 10x26x11.6mm
- 53200 Thrust ball bearings have a spherical housing locating washer. With an
-
- 53232 MP bearing 160x225x54.7mm
- Product data of Thrust ball bearing 53232 MP d 160 mm D
-
- 51144-M bearing 220x300x63mm
- Technical data of 51244-MP ID: 220 mm OD: 300 mm Width: 63 mm Weight: 13.1 kg Basic
-
- 54212 bearing 50x95x50mm
- Technical data of 54212 ID: 50 mm OD: 95 mm Thickness: 50 mm Weight: 1.17
-
- 16015 bearing 75x115x20mm
- Principal data of bearings 16015 Inside diameter=75 mm Outside diameter=115 mm Width=15 mm
-
- 6009-2RSR bearing 45x75x16mm
- Technical data of bearings 6009-2RSR ID: 45 mm OD: 75 mm Width: 16 mm Weight; 0.257
-
- 6219-Z, 6219ZR Deep groove ball bearing 160x290x80mm
- Technical data of 6219-Z (formerly: 6219.ZR) ID: 95 mm OD: 170 mm Width: 32
-
- 6410 bearing 50x130x31mm
- Technical data of 6410 ID: 50 mm OD: 130 mm Width: 31 mm Weight: 1.96 kg