51214 51214M 8214 Thrust Ball Bearing
The 51214M bearing is a thrust ball bearings with an inner diameter of 70 mm , an outer diameter of 105 mm, a width of 27 mm. It typically uses P0 P5 grade precision tolerances and M type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Thrust ball bearings can support high axial forces but must not be subjectedto radial loads, single and double direction designs available.
Features :
Thrust ball bearings consist of two precision chrome steel washers (ring) and a ball complement spaced by bronze retainer. They can be supplied with or without radius ball grooves in the rings. Thrust bearings are used under purely axial loads.Thrust ball bearings can handle loads in the axial direction only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the housing are called housing washers. Both washers contain raceways for the balls.Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve.Care must be taken in handling to prevent damage to the separable rings and ball assemblies.
Applications :
live centers in lathes, lead screws, automotive clutches, kingpin supports, speed reducers
Catalog :
Miniature Thrust Ball Bearings
Single direction thrust ball bearings
Double direction thrust ball bearings
Share this product to:
Let more people see your product
-
- 51122M 8122 Thrust Ball Bearing
- Hong xing bearings was founded in2005, the construction areas are 26000square
-
- 51213M 8213 Thrust Ball Bearing
- 51213 bearings exported to over 30 countries and regions which are
-
- 51214 51214M 8214 Thrust Ball Bearing
- Applications : live centers in lathes, lead screws, automotive clutches,
-
- 51215 51215M 8215 Thrust Ball Bearing
- Applications of thrust ball bearing 51215 live centers in lathes, lead