512127 Bore 136.525 Mm, Tapered Roller Bearings, Double Row For Loose Fit On The Roll Neck
The 512127 Rolling mill bearings are mainly suitable for applications such as floating ends that bear medium to heavy radial loads and need to accommodate shaft thermal expansion, or roll necks that need to bear combined radial and axial loads, as well as gear drives.
The 512127 bearing is a Tapered Roller Bearings, double row for loose fit on the roll neck with an inner diameter of 136.525 mm , an outer diameter of 225.425 mm, a width of 120.65 mm. Bearing steel rings, Bearing steel rolling mlement. It primarily bears Radial and axial loads, its static radial rated load is approximately 1630000 N. Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
512127 bearings ( 136.525 mm x 225.425 mm x 120.65 mm) have the advantages of Extremely high load-bearing capacity and rigidity, and are therefore widely used in the Hot rolling, cold rolling, and wire rod mills.
| Part Number | 512127 |
| Interchangeable | FAG 512127 |
| Desgin Figure | 1 |
| Cage | Stamping steel cage |
| Arrangement | face-to-face (><) |
| Seal | Open |
| Bearing Type | Tapered Roller Bearings, double row for loose fit on the roll neck |
| Design type | TDI |
| Equivalent Timken (TDI-Type) | H228649DW.610 |
| Bearing Weight [lb] | 42.549 |
| d φ Inside [inch] | 5.375 |
| D Φ Outside [inch] | 8.875 |
| B Width [inch] | 4.750 |
| Bi Width [inch] | 4.750 |
| rs min Chamfer Cup | 3.3 mm |
| r1s min Chamfer Cone | 1.5 mm |
| C0r Radial Static [lbf] | 366424 |
| Cr Radial Dynamic ISO 281 [lbf] | 197824 |
| Cr Radial Dynamic (value for housings with angular freedom) [lbf] | 233792 |
| Cr90 Equivalent load rating [lbf] | 59572 |
| Ca90 Equivalent load rating [lbf] | 21356 |
| Factor | |
| e | 0.37 |
| K Thrust factor | 1.58 |
Share this product to:
Let more people see your product
