4200 Bearing 10*30*14mm
The 4200 bearing is a Deep Groove Ball Bearing with an inner diameter of 10 mm , an outer diameter of 30 mm, a width of 14 mm. It typically uses P0, P6, P5, P4 grade precision tolerances and z zz rs 2rs type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
Deep groove ball bearings 4200:
1)The deep groove ball bearing are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.
2) Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.
3) Deep-groove bearings have higher load ratings for their size than shallow-groove , but are also less tolerant of misalignment of the inner and outer races.
4) A misaligned shallow-groove bearing may support a larger load than the same sized deep-groove bearing with similar misalignment.
5) This kind of bearing is also available both in open design and sealed design.
6) The seals way of the bearing: RS: contact seal on one side of the bearing
2RS: contact seals on both sides of the bearing
Z: shield on one side of the bearing
ZZ(2Z): shields on both sides of the bearing.
7) Bearing with -RS seals has better sealing but lower limited speed compared with the bearing with –Z seals.
Applications:
The deep groove ball bearing can be used in many different places such as:
Gearbox, instruments and meters, electric motor, electric appliance, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery, construction machinery, and so on.
Advantages:
Most representative bearing of the rolling bearings
Suitable for high speed even extremely high speed
Durable, less maintenance frequency
Simple structure and low cost
Various sizes and designs.
Share this product to:
Let more people see your product
-
- 6000 bearing 10*26*8mm
- Item: 6000 Ball Bearings Type: Deep Groove Ball Bearing Material: Chorme Steel Gcr15 Size:10x26x8mm
-
- 6001 bearing 12*28*8mm
- 1.6001 high quality GCr15 deep groove ball bearings 2size:12*28*8mm 3.material:GCr15 4.fast delivery ,high quality 5.precison:P0 P6
-
- 4200 bearing 10*30*14mm
- Deep groove ball bearings 4200: 1.less coefficient of friction 2.low noise and
-
- 4201 bearing 12*32*14mm
- 4201 Bearings 4201 Double Row Deep Groove Ball Bearings