320/32 Tapered Roller Bearings
320/32
Bore Diameter:32 mm
Outside Diameter:58 mm
Width:17 mm
Weight:0.187 kg
The 320/32 bearing is a tapered roller bearing(TRB) with an inner diameter of 32 mm , an outer diameter of 58 mm, a width of 17 mm. It typically uses P2 grade precision tolerances and Open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Specifications
China high quality Taper roller bearings
Cometitive price and good quality
long life &low noise
Best after sale service
Tapered roller bearings are bearings that can take large axial forces (i.e., they are good thrust bearings) as well as being able to sustain large radial forces.
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.
This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.
The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.
Metric tapered roller bearings follow the designation system defined by ISO 355.
Applications
In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.
Pairs of tapered roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces. Applications for tapered roller bearings are commonly used for moderate speed, heavy duty applications where durability is required. Common real world applications are in agriculture, construction and mining equipment, axle systems, gear box, engine motors and reducers.
Our Strength:
1) Wide products range : Until now , we have more than 1000 kinds of bearings , thus enabling us to be one of the largest distribute manufactuer.
2) Large stocks : we have many item number in stock , so we can delivery to you at once at your request . If need stock list , feel free to contact me .
3) Good quality and reasonable price : most our customer buy our products in many field , so be sure about our quality .
4) Rich experienced team :we can satisfy with your requirement .
5) Our advantage products include deep groove ball bearing, self-aligning ball bearing, cylinder roller bearing, self-aligning roller bearing, multi-rollbearing, angular contact ball bearing, tapered roller bearing, thrust ball bearing, nonstandard bearing, extra-large bearing, and cross roller.
Hope what we offer is just what you want ,and feel free to contact me for any inquiry , thank you in advance !
Share this product to:
Let more people see your product
-
- 32938 bearing 190mm*260mm*45mm
- Specifications taper roller bearing 32938: 1. good quality 2. high precision 3. best
-
- 32203 JR Tapered Roller Bearings
- Specifications 32203 Tapered roller bearing 1.17*40*17.25 2.High precision 3.Good quality and best
-
- HR 32906 J Tapered Roller Bearings
- Specifications 32203 Tapered roller bearing 1.17*40*17.25 2.High precision 3.Good quality and best
-
- *32010X/Q Tapered Roller Bearings
- Tapered roller bearings are separable, consisting of the inner ring with roller