30214 Bearing 70x125x26.25mm
30214
Bore Diameter:70 mm
Outside Diameter:125 mm
Width:26.25 mm
Weight:1.26 kg
The 30214 bearing is a taper roller bearing with an inner diameter of 70 mm , an outer diameter of 125 mm, a width of 26.25 mm. It typically uses P0,P4,P5,P6 grade precision tolerances and open type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
×
Detailed description
Series: taper roller bearing
Brand: CNJX
Bearing type: 30214 bearing
Inner: 70mm
Outside diameter: 125mm
Thickness: 26.25mm
Product Description
About the tapered roller bearings
Tapered roller bearings can be separated by the inner ring and roller, maintains a together make up components and outer ring can be installed separately. Roller and roll the contact point of the fixed way contact wires can reduce stress concentration.
Tapered roller bearings can withstand the big radial direction load and the axial load. Due to the circular cone roller bearings can only transfer one-way axial load, therefore, to transfer the opposite direction of the axial load will need another with the installation of symmetric circular cone roller bearings. Tapered roller bearings is the largest amount of single row circular cone roller bearings. In the front of the car wheel, recent years have used the small size of the double row circular cone roller bearings. Four row circular cone roller bearings used in large cold, ReGaJi and other heavy machine.
Features of Tapered Roller Bearings:
Single-row tapered roller bearings have an outer ring, and an inner ring assembly consisting of an inner ring and a group of tapered rollers embraced by the basket-shaped cage. The outer ring(cup) is separable from the inner ring assembly. According to standardized dimensions of tapered roller bearing specified by ISO, the outer ring or inner ring assembly of any tapered roller bearing with standardized dimension could make international exchange with the outer ring or inner ring assembly of the same series. That is to say, besides external dimensions, tolerances shall be in accordance with the provisions of the ISO492 (GB307), the cone angle of the inner ring assembly and cone diameter of assembly must also comply with the relevant provisions of the exchange.
Generally, when cone angle of outer ring raceway of single-row tapered roller bearings is from 10°to 19°, they could withstand axial loads and radial loads spontaneously. The big the cone angle, the larger the axial loads carrying capacity. Large-sized tapered roller bearings with post code plus B, the cone angle is from 25° to 29°, they carry large axial loads. In addition, single-row tapered roller bearings have the ability to adjust clearance during installation. The inner ring (or outer ring) of double row tapered roller bearings is a whole part. The small end face between two inner rings (or outer rings) is similar, there is one middle spacer ring between two inner rings, and the clearance is adjusted by thickness of spacer ring, which can also be used for adjusting the pre-interference of double row tapered roller bearings.
Share this product to:
Let more people see your product
-
- 32312 bearing 60x130x48.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32312 bearing Inner: 60mm Outside diameter: 130mm Thickness: 48.5mm
-
- 32207 bearing 35x72x24.25mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32207 bearing Inner: 35mm Outside diameter: 72mm Thickness:24.25mm
-
- 32311 bearing 55x120x45.5mm
- Series: taper roller bearing Brand: CNJX Bearing type: 32311 bearing Inner: 55mm Outside diameter: 120mm Thickness: 45.5mm
-
- 30213 bearing 60x110x23.75mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30213 bearing Inner: 65mm Outside diameter: 120mm Thickness: 24.75mm
-
- 6312-2RS bearing 60x130x31mm
- Bearing Type:Deep groove ball bearing Inner Diameter:60mm Outer diameter:130mm Width:31mm Weight :1.67kg
-
- 30230 bearing 150x270x50mm
- Series: taper roller bearing Brand: CNJX Bearing type: 30230 bearing Inner: 150mm Outside diameter: 270mm Thickness: 50mm
-
- 6901-2Z bearing 12x24x6mm
- Bearing Type:Deep groove ball bearing Inner Diameter:12mm Outer diameter:24mm Width:6mm Weight :0.011kg
-
- 6313-2Z bearing 65x140x33mm
- Bearing Type:Deep groove ball bearing Inner Diameter:65mm Outer diameter:140mm Width:33mm Weight :2.09kg