Wuxi Skybright Bearing Co.,Ltd
Free Member
30212A+T3EB060 Tapered Roller Bearings

30212A+T3EB060 Tapered Roller Bearings

Min. Order:
1 Piece
Payment term:
T/T,L/C
Delivery time:
within 3 days after receive payment
Technical Parameters:
Product Designations:
30212A+T3EB060
Structure:
Tapered Roller Bearings 30212A+T3EB060
Inside Diameter:
60 mm
Outside Diameter:
110 mm
Thickness:
22 mm
Weight:
- KG
Brand:
FAG
Precision Rating:
P2
Bearing Material:
Chrome steel
Seals Type:
Open
30212A+T3EB060 Tapered Roller Bearings

 SpecificationsChina high quality Taper roller bearings 

Cometitive price and good quality 
long life &low noise 
Best after sale service
 
 
 
 
Tapered roller bearings are bearings that can take large axial forces (i.e., they are good thrust bearings) as well as being able to sustain large radial forces.
 
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.
 
This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.
 
The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.
 
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
 
Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.
 
Metric tapered roller bearings follow the designation system defined by ISO 355.
 
 
 
 
 
Applications
In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.
 
Pairs of tapered roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces. Applications for tapered roller bearings are commonly used for moderate speed, heavy duty applications where durability is required. Common real world applications are in agriculture, construction and mining equipment, axle systems, gear box, engine motors and reducers.
 
 
 
 
Our Strength:
 1) Wide products range : Until now , we have more than 1000 kinds of bearings , thus enabling us to be one of the largest distribute manufactuer.
 2) Large stocks : we have many item number in stock , so we can delivery to you at once at your request . If need stock list , feel free to contact me .
 3) Good quality and reasonable price : most our customer buy our products in many field , so be sure about our quality .
 4) Rich experienced team :we can satisfy with your requirement .
 5) Our advantage products include deep groove ball bearing, self-aligning ball bearing, cylinder roller bearing, self-aligning roller bearing, multi-rollbearing, angular contact ball bearing, tapered roller bearing, thrust ball bearing, nonstandard bearing, extra-large bearing, and cross roller.
 
Hope what we offer is just what you want ,and feel free to contact me for any inquiry , thank you in advance !

Share this product to:     Let more people see your product
How can you buy 30212A+T3EB060 Tapered Roller Bearings on the Internet?
High quality 30212A+T3EB060 ( - kg Mass, ID: 60 mm OD: 110 mm WD: 22 mm , P2 Accuracy Class , Chrome steel Material ), Just click the button " Contact Now " to mention your purchase Requirement , Quantity and Contact Method of your requested Bearing Item No. 30212A+T3EB060. then click the button " Send " The web site will make your purchasing information sent to the supplier's mailbox, who will come to contact you upon they get your information at the first time.
30212A+T3EB060 Related Products »