3*19.8 Flat End Loose Needle Rollers
The 3*19.8 bearing is a needle rollers with an inner diameter of 3 mm , an outer diameter of 19.8 mm, It typically uses ABEC1 ABEC3 ABEC5 ABEC7 ABEC9 grade precision tolerances and needles ,cylindrical rollers,rollers type, together determine its load-bearing capacity, rotational accuracy, and applicable working conditions.
As the ancient capital of the thirteen dynasties,Xi’an attracts many famous entrepreneurs of home and abroad to invest and is also the bridgehead of the western development. We adopt German equipment and technologies to produce kinds of bearings.
The Size of cylindrical roller produced by ours: Diameter:3~80mm,Length:3.5~110mm,There are G2,G3,G5 grade;Its material is from Gcr15 steel and hardness is HRC60~64 and surface roughness Ra is not exceeding 0.2. At the same time we have mass production of piston pin,crank pin and other pins.The piston pin and crank pin are usually made from 20CrMo,other pins are usually made from bearing steel with accuracy,surface hardness and roughness according to the industry standard or the requirements of customers. Also welcome for non-standard roller needles requirements
Now,I briefly introduce our products list as following:
| Needle Roller | ||
| Spec (mm) | Spec (mm) | Spec (mm) |
| 1*5.8 | 3*23.8 | 6*6 |
| 1*6.8 | 3*25.8 | 6*8 |
| 1*7.8 | 3*27.8 | 6*17.8 |
| 1*9.8 | 3*29.8 | 6*21.8 |
| 1.5*5.8 | 3.5*11.8 | 6*23.8 |
| 1.5*6.8 | 3.5*13.8 | 6*25.8 |
| 1.5*7.8 | 3.5*15.8 | 6*39.8 |
| 1.5*9.8 | 3.5*17.8 | 7*7 |
| 1.5*11.8 | 3.5*19.8 | 7*10 |
| 1.5*13.8 | 3.5*21.8 | 8*8 |
| 2*6.3 | 3.5*23.8 | 8*12 |
| 2*7.8 | 3.5*25.8 | 9*9 |
| 2*9.8 | 3.5*27.8 | 10*10 |
| 2*11.8 | 3.5*29.8 | 11*11 |
| 2*13.8 | 3.5*34.8 | 11*15 |
| 2*15.8 | 4*15.8 | 12*12 |
| 2*17.8 | 4*17.8 | 12*18 |
| 2*19.8 | 4*19.8 | 14*14 |
| 2*21.8 | 4*21.8 | 14*20 |
| 2.5*7.8 | 4*23.8 | 15*15 |
| 2.5*9.8 | 4*25.8 | 16*16 |
| 2.5*11.8 | 4*27.8 | 17*17 |
| 2.5*13.8 | 4*29.8 | 18*18 |
| 2.5*15.8 | 4*34.8 | 19*19 |
| 2.5*17.8 | 4*39.8 | 20*20 |
| 2.5*19.8 | 5*19.8 | 20*30 |
| 2.5*21.8 | 5*21.8 | 21*30 |
| 2.5*23.8 | 5*23.8 | 22*22 |
| 3*9.8 | 5*25.8 | 24*36 |
| 3*11.8 | 5*27.8 | 25*25 |
| 3*13.8 | 5*29.8 | 25*36 |
| 3*15.8 | 5*34.8 | 26*26 |
| 3*17.8 | 5*39.8 | 28*28 |
| 3*19.8 | 5*49.8 | 30*30 |
| 3*21.8 | 5.5*8 | 30*48 |
If you have any needs,pls contact me immediately !
Awaiting for your email !
Thks,
BearingSara
Share this product to:
Let more people see your product
-
- 5*23.8 CYLINDRICAL ROLLERS
- 5*23.8 LOOSE NEEDLE ROLLERS NEEDLE ROLLERS CHROME STEEL ROLLERS CNC NEEDLE ROLLERS
-
- 2*15.8 flat end needle rollers
- Precise rollers Loose needle rollers Crossed roller bearings Flat-end/round-end rollers NRA NRB ZB rollers
-
- 3.5*27.8 LOOSE NEEDLE ROLLERS
- 3.5*27.8 LOOSE NEEDLE ROLLERS AISI52100 cylindrical rollers Cheapest rollers NEEDLES NRA CYLINDRICAL ROLLERS LONG ROLLERS
-
- 3.5*29.8 NRB ROLLERS
- 3.5*29.8 FLAT END ROLLERS AISI52100 cylindrical rollers Cheapest rollers NEEDLES NRA CYLINDRICAL ROLLERS LONG ROLLERS
-
- 9*8.9 Rollers for crossed roller linear lead rail
- Normal spec: ￠4*2.9 (C0.6*45°) ￠6*5.9 (C1.0*45°) ￠9*8.9 (C1.2*45°) ￠12*11.9 (C1.5*45°) Main Parameters: Material:GCR15, SUJ-2, AISI52100 Hardness:HRC60-65 OD Tol:±0.001 ±0.0015 +0/-0.001mm Height
-
- 3*25.8 needle rollers
- 3*25.8 loose needle rollers Chrome Steel/AISI52100 Rollers AISI304 Rollers AISI420C rollers NRA NRB ZB rollers
-
- 3.5*25.8 LOOSE NEEDLE ROLLERS
- 3.5*25.8 LOOSE NEEDLE ROLLERS AISI52100 cylindrical rollers Cheapest rollers NEEDLES NRA CYLINDRICAL ROLLERS
-
- 2.5*21.8 loose needle rollers
- Precise rollers Loose needle rollers Crossed roller bearings Flat-end/round-end rollers NRA NRB ZB rollers