22211 CC/W33 Spherical Roller Bearing

Types of 22211 CC/W33 Spherical Roller Bearings:

For Spherical Roller Bearings, the dimensional series are:

21300 Series - ISO Dimension Series 13 Spherical Roller Bearings

22200 Series - ISO Dimension Series 22 Spherical Roller Bearings

22300 Series - ISO Dimension Series 23 Spherical Roller Bearings

23000 Series - ISO Dimension Series 30 Spherical Roller Bearings

23100 Series - ISO Dimension Series 31 Spherical Roller Bearings

23200 Series - ISO Dimension Series 32 Spherical Roller Bearings

232/ Series - Extra Large ISO 32 Series Spherical Roller Bearing

23900 Series - ISO Dimension Series 39 Spherical Roller Bearings

24000 Series - ISO Dimension Series 40 Spherical Roller Bearings

24100 Series - ISO Dimension Series 41 Spherical Roller Bearings

29000 Series - ISO Dimension Series 90 Spherical Thrust Roller Bearings

Company introduce:

My company With the same center as the bearing, the spherically formed outer ring raceway can make self-alignment. Their rolling elements linearly come into contact with the raceways of inner ring and outer ring. The Spherical Roller Bearings can take great radial load.

Features :

Spherical roller bearings have good self-aligning ability and can perform during the shaft deflection under load or the shaft misalignment in mounting. This type of bearings has heavy load carrying capacity and anti-impact ability. In addition to radial loads, they can also carry axial loads in two directions. We mainly offer 22xxx, 23xxx, 24xxx series, and wide inner ring Series spherical roller bearings. The type with lubricating oil hole in the inner ring can also be supplied...
1) Spherical roller bearings are principally provided with two rows of symmetrical spherical rollers and a common sphere raceway in out ring, the two inner ring raceways are included at an angle to the bearing axia

2) The bearings have good self-aligning ability and can operate when the shaft deflection under load or the shaft deflection under load or the shaft misaligning in mounting, and their permissible aligning angle is 1 to 2.5 degree

3) This type of bearings has heavy load carrying capacity and anti-impact ability, in addition to radial loads, they also can carry axial loads in two direction

4)In general, this type of bearings permits a low limiting speed.

Applications :
injection molding machines, crane hooks, vertical pumps.

Designs and structures:

TN1: Nylon retainer.
C: Stamped steel retainer and strengthened symmetric rollers; offers considerably higher load ratings than conventional designs for a broad range of applications and long service life.
CA: Alternative design of C design; Precision-machined one-piece brass retainer and strengthened symmetric rollers; used to exchange with C design, especially for large size.
MB: Two-piece precision-machined brass retainer and strengthened symmetric rollers; equivalent to C design in load capacity.
CC: steel cage, replace traditionalbrass cage.
E: Third generation design.
The bearing contact is completely optimized and has improved stress distribution; offer much longer service life than normal designs.